View FH23-61S-03SHW_411868.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
qStaggered termination configuration. Only 1.25 mm above the board.
Leadless type
Completely enclosed bottom surface
Lead type
1.25mm
sFeatures
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design (patents pending) improves the Flexible Printed Circuit (FPC) holding force after insertion. FPC insertion force:Reduced approximately 36% (as compared with FH18 Series connectors). FPC holding force:Improvement of approximately 22% (as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the connector. The connector will hold it in correct position, allowing closing of the actuator. When the actuator is opened
3. Easy board mounting
The surface mounted termination of the contacts is staggered on 0.6 mm centers, positioned on front and back of the connector. Bottom of the connector is completely insulated, allowing conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and reliable operation
Rotating actuator permits easy insertion and reliable connection with the FPC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations (for opposing FPC insertion side).
6. Designed for placement with automatic equipment
Flat top surface allows pick-up with vacuum nozzles. Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
Temporary hold of FPC
7. Accepts 0.2mm thick FPC 8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
sApplications
Mobile phones, PDA's, digital cameras, digital video cameras and other compact devices requiring interconnections of the main circuit with the LCD, plasma display (PDP), camera module, or other devices. When the actuator is closed
2004.6
1
sProduct Specifications
Current rating Ratings Voltage rating 30 V AC 0.3 A DC Operating temperature range -55 c to +85c (Note 1) Operating humidity range Relative humidity 90% max. (No condensation) Storage temperature range -10c to +50c (Note 2) Storage humidity range Relative humidity 90% max.
Recommended FPC Item
Thickness: = 0.20.03mm Tin-lead plating (Note 3) Specification
100 V DC 90 V AC/one minute 1 mA AC 10 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3 axis. Acceleration of 981 m/s 2 , 6ms duration, sine half-wave waveform, 3 cycles, 3 axis.
Conditions
1. Insulation resistance 50 M ohms min. 2. Withstanding voltage No flashover or insulation breakdown 3. Contact resistance 100 m ohms max. *Including FPC/FFC conductor resistance
Contact resistance: 100 m ohms max. 4. Durability 4. (insertion/ withdrawal) No damage, cracks, or parts dislocation. 5. Vibration No electrical discontinuity of 1 s or more. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s. min. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts looseness.
6. Shock
7. Humidity (Steady state)
96 hours at temperature of 40C and humidity of 90% to 95% Temperature:-55c/+15c to +35c/+85c/+15c to +35c Time: 30/ 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350 c5 c for 5 seconds
8. Temperature cycle 9. Resistance to soldering heat
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
sMaterials
Part Insulator Contacts Material LCP LCP Phosphor bronze Color:Beige Color:Black Tin-lead plating (Note 3) UL94V-0 --------------Finish Remarks
sOrdering information
FH23
1 1 Series name : FH23 2 No. of contacts.
- 39S - 0.3 SHW (05)
2 3 4 5 4 Terminal type
SHW: SMT horizontal mounting type, lead type termination. SHAW: SMT horizontal mounting type, lead-less type termination.
Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71
3 Contact pitch: 0.3 mm
5 Plating specifications :
(05) (51) : Gold plating : Tin-lead plating
2
BConnector Dimensions (Lead Type termination)
A 0.3 0.6 B 1.7 (0.15)
2.45
0.6
Number of contacts indicator C
(0.12)
0.05MAX. E 4.15 0.5
(2.84)
1.25(Including contact terminal leads) 0.05MAX. 0.1MAX. 1 2
(D: FPC insertion area dimensions) 1 2
0.1MAX. 0.55
Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Lead Type
Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) CL No. 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number of Contacts 15 17 21 23 25 27 31 33 39 45 51 61 71 A 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 B 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 C 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0
Unit: mm D 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Order by number of reels.
3
sConnector Dimensions Diagram (Leadless Type termination)
A 0.3 0.6 B 1.7 (0.15)
2.45
**
0.6
Number of contacts indicator C
(0.12)
0.05MAX. 0.1MAX. 1 2 E 0.55 4.15
(2.84)
1.25 (Including contact terminal leads) 0.05MAX. 0.1MAX. 1 2
(D: FPC insertion area dimensions)
Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Leadless Type
Part Number FH23-15S-0.3SHAW(51) FH23-17S-0.3SHAW(51) FH23-21S-0.3SHAW(51) FH23-23S-0.3SHAW(51) FH23-25S-0.3SHAW(51) FH23-27S-0.3SHAW(51) FH23-31S-0.3SHAW(51) FH23-33S-0.3SHAW(51) FH23-39S-0.3SHAW(51) FH23-45S-0.3SHAW(51) FH23-51S-0.3SHAW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHAW(51) CL No. 586-1316-7-51 586-1301-0-51 586-1315-4-51 586-1325-8-51 586-1323-2-51 586-1309-1-51 586-1303-5-51 586-1305-0-51 586-1307-6-51 586-1319-5-51 586-1313-9-51 586-1311-3-51 586-1321-7-51 Number of Contacts 15 17 21 23 25 27 31 33 39 45 51 61 71 A 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 B 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 C 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0
Unit: mm D 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Order by number of reels.
4
BRecommended PCB Land and Metal Mask Dimensions (Lead Type)
0.70.05 B0.05 (0.1) (5.2) 0.60.05 0.30.05 (Land) 0.250.05 (Metal mask)
3.450.05
(5.4)
0.30.05
1.250.05
Recommended metal mask thickness: t = 0.1 mm
0.250.05 (Metal mask) C0.05 (0.1) 0.60.05 0.30.05 (Land)
Lead Type
Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) CL No. 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 Number of Contacts 15 17 21 23 25 27 31 B C G Part Number FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) CL No. 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number of Contacts 33 39 45 51 61 71 B 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6
Unit: mm C G 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6
BRecommended Land and Metal Mask Dimensions (Leadless Type)
B0.05 0.650.05 ( 0.1 ) (4.6) 0.60.05 0.30.05(Land) 0.250.05(Metal mask)
2.90.05
0.30.05
(4.8)
1.250.05
Recommended metal mask thickness: t = 0.1 mm
0.60.05 0.30.05(Land) 0.250.05(Metal mask) C0.05 (0.1)
Leadless Type
Part Number CL No. Number of Contacts 15 17 21 23 25 27 31 B C G Part Number CL No. Number of Contacts 33 39 45 51 61 71 B FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 FH23-61S-0.3SHAW(51) 586-1311-3-51 FH23-71S-0.3SHAW(51) 586-1321-7-51
Unit: mm C G 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6
5
BRecommended FPC Dimensions
G0.05 0.3 0.07 0.6 0.02 1.3 0.15 1.1 0.15 0.3 0.15 ( 0.2 ) ( 0.1 ) C0.03 0.30.07
4
0.3
+0.04 -0.03
0.4
2R0 .2
+0.04 -0.03
(0.07)
0.20.03
3.5 0.3 (Area with removed covering layer film)
2.8 0.15
(0.2)
(0.05) 0.60.02
(0.1 between conductors)
(0.2 conductor width)
0.30.02
B0.03
0.60.07
4 5
0.3
+0.04 - 0.03
also permitted when drawing plated leads.
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
BPackaging Specification
qEmbossed Carrier Tape Dimensions(Tape width of 24 mm max.)
1.750.1 40.1 20.15 120.1
+ 0 0 .1
(0.5)
(2)
(1.7) (0.3)
O1
.5
(M)
(N)
K0.1 (0.85) (5.1) (0.5) (2.45)
Flat surface for placement with Automatic equipment
Unreeling direction
H0.3
(L)
Unit: mm Part Number CL No. Number of Contacts 15 15 17 17 21 21 23 23 25 25 27 27 H 16 16 16 16 16 16 24 24 24 24 24 24 K L M N Q Part Number CL No. Number of Contacts 31 31 33 33 39 39 45 45 51 51 H 24 24 24 24 24 24 24 24 24 24 K L M N Q FH23-15S-0.3SHW(51) 586-1317-0-51 FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHW(51) 586-1300-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHW(51) 586-1314-1-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHW(51) 586-1324-5-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHW(51) 586-1322-0-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHW(51) 586-1308-9-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 07.5 07.3 05.1 04.5 16.5 07.5 07.3 05.1 04.5 16.5 07.5 07.9 05.7 05.1 16.5 07.5 07.9 05.7 05.1 16.5 07.5 09.1 06.9 06.3 16.5 07.5 09.1 06.9 06.3 16.5 11.5 09.7 07.5 06.9 24.5 11.5 09.7 07.5 06.9 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.9 08.7 08.1 24.5 11.5 10.9 08.7 08.1 24.5 FH23-31S-0.3SHW(51) 586-1302-2-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 FH23-33S-0.3SHW(51) 586-1304-8-51 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHW(51) 586-1306-3-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHW(51) 586-1318-2-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHW(51) 586-1312-6-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 11.5 12.1 09.9 09.3 24.5 11.5 12.1 09.9 09.3 24.5 11.5 12.7 10.5 09.9 24.5 11.5 12.7 10.5 09.9 24.5 11.5 14.5 12.3 11.7 24.5 11.5 14.5 12.3 11.7 24.5 11.5 16.3 14.1 13.5 24.5 11.5 16.3 14.1 13.5 24.5 11.5 18.1 15.9 15.3 24.5 11.5 18.1 15.9 15.3 24.5
6
qEmbossed Carrier Tape Dimensions(Tape width of 32 mm min.)
1.750.1 40.1 20.15 120.1
+0 0 .1
(1.7) (0.3)
O1. 5
(M)
(N)
(L)
K0.1
1.5 +0.1 0
1.7 +0.15 0
Unreeling direction
(0.85)
(5.1)
(0.5)
Flat surface for placement with Automatic equipment
(2.45)
H0.3
J0.1
Unit: mm Part Number FH23-61S-0.3SHW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHW(51) FH23-71S-0.3SHAW(51) CL No. 586-1310-0-51 586-1311-3-51 586-1320-4-51 586-1321-7-51 Number of Contacts 61 H 32 J 28.4 K 14.2 L 21.1 M 18.9 N 18.3 Q 32.5
71
44
40.4
20.2
24.1
21.9
21.3
44.5
qReel Dimensions
(2) (Q)
(O1 3)
(O380)
End portion
Mounting portion
Lead portion (400 mm min.)
Blank portion (10 pockets min.)
Embossed carrier tape
(O80)
Blank portion (10 pockets min.)
Top cover tape
7
BRecommended Temperature Profile
qUsing Typical Solder Paste
5 sec. Max. 250 240c
Temperature
200
200c
150
160c 150c
(c) 100
50 25c(60 sec.) 0 Start 60 Preheating 120 Time (Seconds) Soldering 60 sec. to 90 sec. (30 sec.) (20 sec. to 30 sec.)
HRS test conditions Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2) Environment :Room air Solder composition :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.'s Part Number: OZ63-201C-50-9) Test board :Glass epoxy 45mm100mm1.6mm thick Land dimensions :Lead type 0.3mm1.25mm, 0.3mm0.7mm Leadless type 0.3mm1.25mm, 0.3mm0.65mm Metal mask :Lead type 0.25mm1.25mm0.1mm thick 0.25mm0.7mm0.1mm thick Leadless type 0.25mm1.25mm0.1mm thick 0.25mm0.65mm0.1mm thick This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations.
qUsing Lead-free Solder paste
Max. 250c 250 230c 200 200c
HRS test condition Solder method
Temperature
Environment Solder composition
150
150c
(c) 100
Test board Land dimensions
50 25c (60 sec.) 90 sec. to 120 sec. 0 Start 60 Preheating 120 Time (Seconds) Soldering
(60 sec.)
Metal mask
:Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2) :Room air :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5) :Glass epoxy 45mm100mm1.6mm thick : Lead type 0.3mm1.25mm, 0.3mm0.7mm Leadless type 0.3mm1.25mm, 0.3mm0.65mm : Lead type 0.25mm1.25mm0.1mm thick 0.25mm0.7mm0.1mm thick Leadless type 0.25mm1.25mm0.1mm thick 0.25mm0.65mm0.1mm thick
In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations.
8
BFH23 Series FPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Polyamide 1 mil thick Tin-lead plating Cu 1oz Material Polyamide 1 mil thick. Thickness (m) 25 25 5 35 25 25 30 75 195
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total 3 mil thick
2. Using Double-sided FPC
Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Polyamide 1 mil thick Cu 1/2oz Polyamide 1 mil thick Tin-lead plating Cu Cu 1/2oz Material Polyamide 1 mil thick Thickness (m) 25 25 5 15 18 18 25 18 18 25 25 25 25 199
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total 1 mil thick
3. Precautions
Note : Recommended specification for FPC 0.20.03 mm thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division 5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan Fujikura Ltd. Electronics Global Marketing Department 1-5-1, Kiba, Koto-ku, Tokyo, Japan NOK Corporation Sales Division Overseas Business Department 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan TEL:+81 3 5462 4191 FAX:+81 3 5462 4882 TEL:+81 3 5606 1165 FAX:+81 3 5606 1530 TEL:+81 3 3432 6976/8415 FAX:+81 3 3432 3919
9
BConnector Operating Instructions, precautions and recommendations
Operation Precautions
1) Do not apply excessive force or use any type of tool to operate the actuator.
1.FPC Termination procedure. Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed. NOTE: The FPC must be fully inserted in the connector. If not fully inserted, the actuator will not close properly. Should this be the case, lift up the actuator (per Step 2 below) and repeat the process (starting with Step 1 above)
2) The connector will assure reliable performance when the actuator is open to 90 maximum (see fig.1) Do not exceed this angle, as this may cause permanent damage to the connector.
90c
3) For connectors with multiple contacts, such as 39 and 61 pos. rotate down the actuator pushing at both ends.
3) Assure that the FPC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down.
2.FPC Removal
1) Lift up the actuator. 2) Carefully remove the FPC.
FPC conductor surface
10

▲Up To Search▲

Price & Availability of FH23-61S-03SHW

	To Download FH23-61S-03SHW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .